درایور لرزش ادی کارنت MTN/ECPD/85
MTN/ECPD/85
Applications
• Air handling units
• Building services
• Fans
The MTN/ECPD/85 unit together with the MTN/EP series Eddy current Probe is a three wire, non-contactmeasurement system
designed to monitor axial displacement of a rotating shaft. The driver is powered from a 24V dc supply and provides a 4-20mA signal
Proportional to the gap between the probe and shaft. The system is calibrated in house using a flat, low carbon steel grade SEA4140
target to give a linear output.
درایور MTN/ECPD/85 همراه با پراب ادی کارنت سری MTN/EP یک سیستم بدون تماس جهت اندازه گیری ومانیتور لرزش محور ماشین های دوار تشکیل می دهد.
این درایور توسط ولتاژ DC 24 ولت تغذیه می شود و یک سیگنال 20-4 میلی آمپر خروجی متناسب با فاصله شفت و پراب ایجاد می کند.
MTN/EP080 – 0.1mm to 2mm
MTN/EP200 – 0.25mm to 5mm
MTN/EP340 – 0.4mm to 8.5mm
MTN/EP480 – 0.6 mm to 12mm
4-20mA via screw terminals, set to equal
Measurement range
+24V@ 80 mAmax
(dependent upon probe)
MTN/EP080 – 8 Volts/mm
MTN/EP200 – 3.6Volts/mm
MTN/EP340 – 2.0 Volts/mm
MTN/EP480 – 1.5Volts/mm
Rmax =800Ω
±1% of full scale
AC Vibration (5Hz – 1kHz)
-20°C to 80°C
Probe – SMC miniature coaxial connector
Power/outputs – M4 screw terminals
450g
Technical Specification:
Measurement Range
Current output
Power Supply
Voltage Output Sensitivity
Max. Loop Resistance
Linearity
Frequency Range
Operating Temperature
Connectors
Weight