Category Archives: تجهیزات اندازه گیری لرزش

تجهیزات اندازه گیری لرزش, محصولات

شتاب سنج مونیتران MTN/7100

Posted on by namdar
شتاب سنج مونیتران MTN/7100
MTN/7100-5

Applications
• Research & development
• Structural monitoring

The MTN/7100 is a special purpose, side entry, low frequency accelerometer with output response starting at DC 0Hz. Made from compact stainless steel throughout for continuous vibration monitoring. Ideal for laboratory and light industrial environments. Sealed to IP65 and includes integral stainless steel overbraided cable. Alternative mountings available; four point, stud and Quickfit.

N/7100 is a special purpose, side entry, low frequency accelerometer with output response starting at DC 0Hz. Made from compact stainless steel throughout for continuous vibration monitoring. Ideal for laboratory and light industrial environments. Sealed to IP65 and includes integral stainless steel overbraided cable. Alternative mountings available; four point, stud and Quickfit.

MTN/7100 یکشتاب سنج خاص جهت کار در فرکانس های پایین با خروجی از صفر هرتز (DC) می باشد. با بدنه ساخته شده از استنلس استیل و دارا بودن گواهی IP65 و کابل یکپارچه متصل می تواند در شرایط سخت کار نماید.

Technical:
Sensitivity 0.6-20mV/g (depending on range)
Calibration Data supplied with sensor
)
Supply voltage range 5V DC
Frequency response Depending on Dynamic range (±5%)
± 1g DC to 250 Hz, ± 10g -DC to 500Hz
± 2g DC to 250 Hz, ± 20g -DC to 700Hz
± 5g DC to 300 Hz, ± 50g- Dc to 1Kz
Resonant frequency ± 1g – 700 Hz, ± 10g – 850 Hz
± 2g – 700 Hz, ± 20g – 1200 Hz
± 5g – 800 Hz, ± 50g – 1800 Hz
Isolation Base isolated
Operating temperature -20°C to + 90°C
Storage Temp -40°C to 125°C
Output Impedance 3000 Ohms
Acceleration Limits x20 any direction
Electrical Noise 10μg
Weight 40g (nominal)
Case material Stainless steel
Cable Stainless steel over braided PVC
Sealing IP65

دیتاشیت MTN7100-5دریافت
تجهیزات اندازه گیری لرزش, محصولات

ترنسدیوسر چند منظوره شتاب MTN/1100

Posted on by namdar

General purpose industrial accelerometer

ترنسدیوسر چند منظوره شتاب MTN/1100
MTN/1100

Applications
•Data collection
•Heavy industry
•Paper machinery

General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes 2-pin C5015 military style connector. Available with a wide range of mountings.

General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes 2-pin C5015 military style connector. Available with a wide range of mountings.

ترنسدیوسر چند منظوره با خروجی AC می باشد که با توجه به دارا بودن گواهی IP67 توانایی کار در شرایط سخت را داراست.

این ترانسدیوسر دارای خروجی 20-4 میلی آمپر می تواند مستقیما به PLC و سیستم های اتوماسیون متصل شود.

Technical:
Standard sensitivity 100mV/g ±10% nominal @ 80Hz
Frequency response 2Hz to 10kHz ±5% (-3dB @ 0.8Hz)
Mounted base resonance 18kHz (nominal)
Isolation Base isolated
Dynamic range ±80g
Transverse sensitivity Less than 5%
Electrical noise 0.1mg max
Current range 0.5 to 8mA
Temperature range -55 to 140°C
Bias voltage 12V DC (nominal)
Case material Stainless steel
Mating connector MTN/MH002
Maximum cable length 1000m
Mounting torque 8Nm
Weight 110g (nominal)
Sealing IP67

دیتاشیت MTN/1100دریافت
تجهیزات اندازه گیری لرزش, محصولات

ترنسدیوسر سرعت مونیتران MTN/1185 4-20mA velocity transducer for PLC interface

Posted on by namdar
ترنسدیوسر سرعت مونیتران MTN/1185 4-20mA velocity transducer for PLC interface
MTN/1185-50

General purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Sealed to IP67 with industry standard two-wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral 3-pin 62GB connector and is available with a wide range of mountings.

ترنسدیوسر چند منظوره با خروجی DC می باشد که با توجه به دارا بودن گواهی IP67 توانایی کار در شرایط سخت را داراست.

این ترانسدیوسر دارای خروجی 20-4 میلی آمپر می تواند مستقیما به PLC و سیستم های اتوماسیون متصل شود.

Technical
 Output current 4-20mA DC proportional to rms velocity (mm/s)
Supply voltage 12-32V DC (4-20mA)
Frequency response 2Hz to 1kHz ±10%
Mounted base resonance 5kHz (nominal)
Isolation Base isolated
Dynamic range 50g peak
Transverse sensitivity Less than 5%
Operating temperature -25 to 90°C
Temperature sensitivity 0.08%/°C
Case material Stainless steel
Mating connector MTN/MH008
Mounting torque 8Nm
Weight 140g (nominal)
Sealing IP67

دیتاشیت MTN/1185دریافت
تجهیزات اندازه گیری لرزش, محصولات

درایور لرزش ادی کارنت MTN/ECPD/85

Posted on by namdar
درایور لرزش ادی کارنت MTN/ECPD/60

Applications
• Air handling units
• Building services
• Fans

The MTN/ECPD/85 unit together with the MTN/EP series Eddy current Probe is a three wire, non-contactmeasurement system
designed to monitor axial displacement of a rotating shaft. The driver is powered from a 24V dc supply and provides a 4-20mA signal
Proportional to the gap between the probe and shaft. The system is calibrated in house using a flat, low carbon steel grade SEA4140
target to give a linear output.

درایور MTN/ECPD/60 همراه با پراب ادی کارنت سری MTN/EP یک سیستم بدون تماس جهت اندازه گیری ومانیتور لرزش محور ماشین های دوار تشکیل می دهد.

این درایور توسط ولتاژ DC 24 ولت تغذیه می شود و یک سیگنال 20-4 میلی آمپر خروجی متناسب با فاصله شفت و پراب ایجاد می کند.

Technical:

Measurement Range
MTN/EP080 – 0.1mm to 2mm
MTN/EP200 – 0.25mm to 5mm
MTN/EP340 – 0.4mm to 8.5mm
MTN/EP480 – 0.6 mm to 12mm
Current output 4-20mA via screw terminals, set to equal
Measurement range
Power Supply +24V@ 80 mAmax
Voltage Output Sensitivity (dependent upon probe)
MTN/EP080 – 8 Volts/mm
MTN/EP200 – 3.6Volts/mm
MTN/EP340 – 2.0 Volts/mm
MTN/EP480 – 1.5Volts/mm
Max. Loop Resistance Rmax =800Ω
Linearity ±1% of full scale
Frequency Range AC Vibration (5Hz – 1kHz)
Operating Temperature -20°C to 80°C
Connectors Probe – SMC miniature coaxial connector
Power/outputs – M4 screw terminals
Weight 450g

دیتاشیت MTN/ECPD/85دریافت
تجهیزات اندازه گیری لرزش, محصولات

سنسور لرزش Eddy Current مونیتران

Posted on by namdar
سنسور لرزش ادی کارنت eddy current Industrial Eddy Current Probe
پراب لرزش ادی کارنت mtn/ep080 eddy current

پراب صنعتی ادی کارنت MTN/EP080

کاربردها:

مانیتور لرزش پمپ

اندازه گیری لرزش انواع توربین

اندازه:

MTN/EP080-100: دارای طول پراب 100 میلی متر

MTN/EP080-36 : دارای طول پراب 36 میلی متر

MTN/EP080-36 : دارای طول پراب 36 میلی متر
MTN/EP080-100
MTN/EP080-100

Technical:

Power Supply : -24VDC@ 30mA
Sensitivity : 8mV/μm nominal
Output Impedance : <50 Ohms
Linear Range : 0 – 2mm
Linearity : 1% nominal
Frequency Range : DC to 10 kHz
Operating Temperature : Probe: -30°C to 180°C / Driver: -20°C to 80°C
Temperature Sensitivity : Probe: Less than 5% at 150°C
Driver: Less than 5% at 80°C :
Tip Material : Peek
Case Material : Stainless steel
Cable : RG179 PTFE insulated
Maximum Cable Length : 9 metres
Extension Cable : MTN/EX00? (Length to be specified)
CalibrationMaterial : Steel grade AISI 4140

دیتا شیت سنسور MTN/EP080 دریافت