Applications
• Research & development
• Structural monitoring
The MTN/7100 is a special purpose, side entry, low frequency accelerometer with output response starting at DC 0Hz. Made from compact stainless steel throughout for continuous vibration monitoring. Ideal for laboratory and light industrial environments. Sealed to IP65 and includes integral stainless steel overbraided cable. Alternative mountings available; four point, stud and Quickfit.
N/7100 is a special purpose, side entry, low frequency accelerometer with output response starting at DC 0Hz. Made from compact stainless steel throughout for continuous vibration monitoring. Ideal for laboratory and light industrial environments. Sealed to IP65 and includes integral stainless steel overbraided cable. Alternative mountings available; four point, stud and Quickfit.
MTN/7100 یکشتاب سنج خاص جهت کار در فرکانس های پایین با خروجی از صفر هرتز (DC) می باشد. با بدنه ساخته شده از استنلس استیل و دارا بودن گواهی IP65 و کابل یکپارچه متصل می تواند در شرایط سخت کار نماید.
Technical:
Sensitivity 0.6-20mV/g (depending on range)
Calibration Data supplied with sensor
)
Supply voltage range 5V DC
Frequency response Depending on Dynamic range (±5%)
± 1g DC to 250 Hz, ± 10g -DC to 500Hz
± 2g DC to 250 Hz, ± 20g -DC to 700Hz
± 5g DC to 300 Hz, ± 50g- Dc to 1Kz
Resonant frequency ± 1g – 700 Hz, ± 10g – 850 Hz
± 2g – 700 Hz, ± 20g – 1200 Hz
± 5g – 800 Hz, ± 50g – 1800 Hz
Isolation Base isolated
Operating temperature -20°C to + 90°C
Storage Temp -40°C to 125°C
Output Impedance 3000 Ohms
Acceleration Limits x20 any direction
Electrical Noise 10μg
Weight 40g (nominal)
Case material Stainless steel
Cable Stainless steel over braided PVC
Sealing IP65
